Brother HL-1430 - For Mac os X 10.1 to 10.2 Users; Installing the Driver & Connecting the Printer to Your Macintosh

17
Installing the Driver & Connecting the Printer to your Macintosh
1 Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2 Click the Install button, and follow the
on-screen instructions.
3 Make sure the printer power switch is on.
4 Connect the USB interface cable to your
Macintosh, and then connect it to the
printer.
5 Select Applications from the Go menu.
6 Open the Utilities folder.
For USB Interface Cable Users
For Mac
®
OS X 10.1 to 10.2 Users
Do not connect the USB cable to the
keyboard USB Port or a non-powered
USB Hub.
Continue to
the next page
Installing the Driver
Macintosh
®
USB
Setting Up
Your Printer