CHAPTER 11 TROUBLESHOOTING
11-9
Windows NT/LAN Server (TCP/IP)
Troubleshooting
If you are having trouble printing with Windows NT or LAN Server, check the
following:
1. Make sure that TCP/IP and TCP/IP print service are installed and running on
the Windows NT system or the LAN Server file server.
2. If you are using DHCP and you have not created a reservation for the print
server, make sure that you enter the NetBIOS name of the print server in the
"Name or address of server providing lpd" box.
Windows 95/98/Me Peer to Peer Print
(LPR) Troubleshooting
If you are having trouble printing on a Windows 95/98/Me Peer-to-Peer network
(LPR method), check the following:
1. Make sure that the Brother LPR Port driver is correctly installed and
configured according to the Windows 95/98/Me Peer-to-Peer chapters.
You may find that during the installation of BLP software, the screen that prompts
you for a Port name is not displayed. This may happen on some Windows 95/98/Me
computers. Press the ALT and TAB keys to make it appear.
To Next Page
Loading...
