ix
Using BRAdmin and the TCP/IP Protocol to change the IP address 10-4
Using DHCP to Configure the IP address 10-5
Using ARP to Configure the Print Server IP Address 10-6
Using RARP to Configure the IP Address 10-7
Using BOOTP to Configure the IP Address 10-8
Configuring the IP Address with DEC NCP or BRCONFIG 10-9
Changing the IP Address settings with the TELNET Console 10-11
Other Sources of Information 10-12
CHAPTER THIRTEEN TROUBLESHOOTING
Overview 11-1
Installation problems 11-2
Intermittent Problems 11-5
TCP/IP Troubleshooting 11-6
UNIX Troubleshooting 11-7
Windows NT/LAN Server (TCP/IP) Troubleshooting 11-9
Windows 95/98/Me Peer to Peer Print (LPR) Troubleshooting 11-9
Windows 95/98/Me Peer-to-Peer (HP JetAdmin compatible method)
Troubleshooting 11-10
Windows 95/98/Me/NT 4.0 Peer-to-Peer Print (NetBIOS) Troubleshooting 11-10
Brother Internet Print (TCP/IP) Troubleshooting 11-11
Windows 95/98/Me/2000 FTP/IPP Troubleshooting 11-12
Novell NetWare Troubleshooting 11-13
AppleTalk Troubleshooting 11-14
DLC/LLC Troubleshooting 11-15
Web Browser Troubleshooting (TCP/IP) 11-15
To Next Page
Loading...
