CHAPTER 10 TCP/IP CONFIGURATION
10-1
10
CHAPTER TEN
TCP/IP Configuration
101
Assigning TCP/IP Information
Overview
The TCP/IP protocol requires that each device on the network have it's own unique
IP address. Use the following information to learn about IP address configuration.
By default Brother print servers have a sample IP address of 192.0.0.192, however,
you can easily change this IP address number to match with the IP address details of
your network. This can be done in any of the following ways:
1. Printer front panel setting (If your printer has an LCD front panel)
2. BRAdmin application (for Windows 95/98/Me/NT 4.0/2000 using the
IPX/SPX or TCP/IP protocol)
3. DHCP, Reverse ARP (rarp) or BOOTP
4. The ARP command.
5. DEC NCP, NCL, or ccr utilities
6. Brother BRCONFIG NetWare utility (A Novell Network is necessary)
To Next Page
Loading...
