CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-18
(4) Remove the roller holder using a pair of tweezers from the paper guide upper ASSY while
pushing the pressure roller slightly down to assist the roller holder being released.
Fig. 4-28
(5) Turn the DX feed ASSY upside down and remove the bind B M3x5 Taptite screw from the
DX feed ASSY.
(6) Turn the DX feed ASSY the correct way up and remove the side regist roller holder and
the pressure rollers using a pair of tweezers by releasing the boss from the left guide plate
ASSY. Remove the two pressure rollers from the side regist roller holder.
Fig. 4-29
(boss)
Roller holder
Pressure roller
Paper guide upper ASSY
Pressure rollers
Side regist roller holder
Taptite,bind B M3x5
DX feed ASSY (Back side)
DX feed ASSY
(boss)
Left guide plate ASSY
To Next Page
Loading...
