Brother HL-1870N - Page 137

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-30
(5) Remove the three bind B tite 3x10 screws to remove the FU front paper guide from the
fixing unit .
Fig. 4-50
(6) Remove the two cup B M3x20 Taptite screws from the top of the fixing unit frame.
(7) Release the thermistor harness from the hooks.
Fig. 4-51
Fixing unit
Screw, bind B tite 3x10FU front paper guide
Pin
Taptite, cup B M3x20
Taptite, cup B M3x20
Thermistor harness
Fixing unit
(hooks)