Brother HL-1870N - Page 147

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-40
(24) Remove the eject pinch roller F (8pcs.) with the eject pinch roller holder R (2pcs.) and the
eject pinch roller holder L (2pcs.) from the FU frame upper, and then remove the eject
pinch spring (4pcs.).
Fig. 4-66
(25) Remove the four eject pinch roller F from the two eject pinch roller holder R and the four
eject pinch roller F from the two eject pinch roller holder L.
Fig. 4-67
Eject pinch springs
Eject pinch springs
Eject pinch roller F with
eject pinch roller holder L
Eject pinch roller F with
eject pinch roller holder R
FU frame upper
Eject pinch roller F
Eject pinch roller F
Eject pinch roller holder R
Eject pinch roller holder L