Brother HL-1870N - Page 261

CHAPTER 7 HIDDEN FUNCTIONS
7-8
Title & Subtitle Item to be Set Description
PS300RESO PS300RESO=NO*
Does not reduce the resolution
automatically.
PS300RESO=IF 2M
Reduces the resolution to
300dpi when the total memory is
2Mbytes.
PS300RESO=FORCE
Reduces the resolution to
300dpi.
COPY PAGES COPY PAGES=ON*
COPY PAGES=OFF
OFF: 1 page is fixed for the
copy page number.
PANEL RESET MODE RESET=NORMAL*
RESET=JOB
JOB: Changes reset printer
function to job cancel function.
JOB TIMEOUT SEL TIMEOUT=ON*
PJL JOB TIMEOUT is effective.
TIMEOUT=OFF
PJL JOB TIMEOUT does not
carry out.
BACKLIGHT TEST BACKLIGHT=OFF
BACKLIGHT=GREEN
BACKLIGHT=RED
BACKLIGHT=ORANGE
exit
Tests color of the backlight.
VIEWANGLE TEST VIEWANGLE=0
VIEWANGLE=1
VIEWANGLE=2
exit
Tests view angle of the LCD
display.
NV-RAM DEBUG NV-RAM DISPLAY
NV-RAM HEX PRINT
exit
Displays and prints out NVRAM
data. Users MUST NOT use
this function.
JOB CANCEL TIME TIME OUT=XXsec
Selects time (1 to 255 seconds)
job cancel job becomes time
out
PSJAPANESE FONT JAPFONT=OFF
JAPFONT=ON
Decide to support PS3
Japanese font or not. Default is
ON in domestic. OFF in
overseas.
EXCAHNGE FONTNAME EXCHANGE=OFF
EXCHANGE=ON
In PS3 Japanese fonts, when
the font name which is not
supported is specified, it
determines whether substitute
internally or not.
PSCOPUPAGE PSCOPYPAGE=L3*
PSCOPYPAGE=L2
Switch the PS copypage
operator mode to level 2 mode
or level 3 mode. Default is L3.