Brother HL-1870N - Page 46

HL-1850/1870N SERVICE MANUAL
2-17
When printing on labels or transparencies, follow the steps below;
(1) Open the multi-purpose tray.
(2) Unfold the multi-purpose tray extension.
For printing on labels, open the face up output tray. When printing on transparencies,
print to the face down output tray.
Fig. 2-22
Fig. 2-23
(3) Place paper in the multi-purpose tray so it
touches the back of the tray and remains below
the limit mark.
Fig. 2-24
NOTE:
Note the following when placing paper in the multi-purpose tray:
• If paper to be printed on weighs more than 135 glm
2
(36 lbs), use the face up output tray.
• Insert the leading edge of the paper first and push it gently into the tray.
• The printed side must be face up.
(4) Press and slide the paper width adjuster to fit the
paper.
Fig. 2-25
(5) Change the settings in the printer driver Property tab.