CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-5
Brother Internet Print
Using a Web Browser to configure the
Print Server
1. Connect to the printer server IP address using your web browser.
2. When you reach the network configuration screen, you will be prompted
for a password. The default password is "access"
3. Select the Configure POP3/SMTP option and enter the information as
described above. Refer to "Using BRAdmin to Configure the Print
Server"
4. You should see a Segmented Message Timeout option. If a print job is
separated into multiple E-mail messages using the Partial E-mail Print
feature of the BIP, this value indicates how long the print server will
wait for all of the segments of the message to arrive.
To Next Page
Loading...
