Brother HL-2030 - Page 108

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
Confidential
4-16
(5) Remove the two PR arm ASSY and two PR bush from the pressure roller.
Fig. 4-25
(6) Release each hook of the springs from the fuser frame and remove the four separate claw
ASSYs.
NOTE:
Be careful not to damage the heat roller when removing the separate claw ASSY.
Fig. 4-26
Pressure roller
PR bush
PR bush
PR arm ASSY
PR arm ASSY
A
lign the separate claw ASSY with
the shape of the fuser frame to remove.
1
Fuser frame
Separate claw ASSY
Separate claw ASSY
2
Heat roller