CHAPTER 4 CONTROL PANEL
4–83
Display Message Reset Mode
RESET PRINTER Resets the printer and restores all
printer settings–including
command settings–to settings you
have previously made with the
panel switches.
RESET SETTING 1 Resets the printer and restores all
RESET SETTING 2 printer settings–including
command
settings–to the selected
number (1-2) of user settings you
have previously made with the
MODE switch.
FACTORY SETTINGS Resets the printer and restores all
printer settings–including
command settings–to the factory
settings. See “List of Factory
Settings.”
exit Exits from the reset mode. The
printer is not reset.
4. Press the SET switch to make the displayed selection effective.
The printer is reset according to the selected reset mode.
When the “RESET PRINTER” mode has been selected, the printer is
reset showing the message alternately as follows:
08 RESET TO
→
USER SETTINGS
When the “RESET SETTING 1-2” mode has been selected, the printer
is reset showing the message alternately as follows (# indicates the
selected number of saved settings):
08 RESET TO
→
SETTING #
When the “FACTORY SETTINGS” mode has been selected, the
printer is reset showing the message alternately as follows:
09 RESET TO
→
FACTORY SETTINGS
Then the printer automatically exits from the reset mode to the on-line
state.
To Next Page
Loading...
