Setting Up the Machine
9
2 Loading paper in the paper
tray
1 Pull the paper tray completely out of the printer.
2 While pressing the green paper-guide release
lever, slide the paper guides to fit the paper
size you are using. Make sure that the guides
are firmly in the slots.
3 Fan the stack of paper well to avoid paper jams
and misfeeds.
4 Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark (1).
5 Put the paper tray firmly back into the printer.
Make sure that it is completely inserted into the
printer.
1
To Next Page
Loading...
