Brother HL-2220 - Page 112

76
3.Network
(For DCP-7065DN)
(Continued)
1.TCP/IP
(Continued)
7.WINS
Server
— Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
WINS server.
8.DNS Server — Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
DNS server.
9.APIPA — On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
0.IPv6 — On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://solutions.
brother.com/ for
more information.
2.Ethernet ——Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the
Ethernet link mode.
3.Status ——Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
Shows the Ethernet
link status.
4.MAC
Address
— — — Shows the MAC
address of the
machine.
0.Network
Reset
— a Reset
b Exit
Reboot OK?
a Yes b No
Restore all network
settings to factory
default.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.