Brother HL-2400C - Cleaning the Transfer Roller

VI-9
1.2.4 Cleaning the Transfer Roller
The transfer roller should be cleaned according to the periodic maintenance cleaning
cycle set out in Table 6-3.
<Tools to Prepare>
Cotton cloth (2
∼
3 pieces)
<Cleaning Procedure>
1) Turn off the power supply, and unplug the power cable.
2) Open the rear access cover (transfer unit).
3) Using a cotton cloth, clean the transfer roller.
Fig.6-4
CAUTION
NEVER use alcohol or similar solvents for cleaning the transfer roller.
Transfer Unit
Transfer Roller