Brother HL-2400C - Cleaning the Transfer Drum

VI-12
1.2.7 Cleaning the Transfer Drum
The transfer drum should be cleaned according to the periodic maintenance cleaning
cycle set out in Table 6-3.
<Tools to Prepare>
Cotton cloth (2
∼
3 pieces)
<Cleaning Procedure>
1) Turn off the power supply.
2) Open the rear access cover.
3) Clean the surface of the transfer drum with a dry or damp cotton cloth.
Fig.6-8
CAUTION
• Be sure to dry the transfer drum completely after cleaning it with a damp cotton
cloth.
• Do not clean the transfer drum by using solvent.
• Do not touch the transfer drum surface with bare hands, or scratch it.
Transfer Drum