Brother HL-2400C - 4.1.11 Developer Drive Unit; Drum Cleaner Solenoid (FBSOL)

VII-13
4.1.11 Developer Drive Unit
1) Open the front cover.
2) Remove the waste toner box.
3) Remove the harness guide.
4) Remove the set screws ST3X6 (4 pcs.) from the developer drive unit.
5) Remove the developer drive unit.
Fig.7-16
4.1.12 Drum Cleaner Solenoid (FBSOL)
1) Remove the set screws ST3X6 (2 pcs.) from the drum cleaner solenoid.
2) Remove the drum cleaner solenoid.
Fig.7-17
Developer Drive Unit
Harness guide
Drum Cleaner
Solenoid