Brother HL-2400C - Interlock Switch (Top) (Paper Exit Unit); Drum Cleaner

VII-21
4.2.8 Interlock Switch (Top) (Paper Exit Unit)
1) Remove the set screw BT3X8 (1 pc.) and remove the switch base from the control fan
case.
2) Remove the interlock switch from the switch base.
CAUTION
Since the interlock switch is an important safety item, after installation confirm that the
switch operates correctly.
Fig.7-33
4.2.9 Drum Cleaner
1) Push the two hooks on the cleaner cover rearward to release them and remove the
cleaner cover.
2) Remove the drum cleaner by pushing the handle backwards until it releases from the
contacts at the left and right hand ends, then lift out the drum cleaner assembly.
Fig.7-34
Control fan
case
Interlock Switch
Switch base
Drum Cleaner
Handle