Brother HL-2400C - Drum Jam Sensor (DPJ); Oil Sensor (OIL)

VII-24
4.2.13 Drum Jam Sensor (DPJ)
1) Remove the cover F by lifting the left hand end of the cover and sliding the cover to
the right to release the catches.
2) Disconnect the drum jam sensor connector.
3) Remove the drum jam sensor.
Fig.7-38
4.2.14 Oil Sensor (OIL)
1) Remove the set screw ST3X6 (2 pcs.) from the oil sensor.
2) Disconnect the oil sensor connector.
3) Remove the oil sensor assembly.
Fig.7-39
Cover F
Drum Jam Sensor
Oil Sensor
Assembly