Brother HL-2400C - Rear Cover (R); Power Supply Unit

VII-30
4.3.6 Rear Cover (R)
1) Remove the set screw BT4X8 (1 pc.) of rear cover (R).
2) Remove the rear cover (R).
Fig.7-48
4.3.7 Power Supply Unit
1) Disconnect the harnesses (4 pcs.) connected to the power supply unit.
2) Remove the power switch key.
3) Remove the set screws ST3X6 (2 pcs.) holding the power switch and metal bracket to
the printer.
4) Remove the power switch and metal switch bracket.
5) Remove the set screws ST3X6 (2 pcs.) holding the power switch to the switch
bracket.
6) Remove the power switch.
Fig.7-49
Metal switch bracket
Power switch
ke
y
Power switch
Rear Cover (R)