Brother HL-2400C - Paper Empty Sensor (PE); OHP Sensor (OHP); Paper Feeding Sensor (PT1)

VII-43
4.6.5 Paper Empty Sensor (PE) / OHP Sensor (OHP)
1) Remove the sensor connector.
2) Remove the set screws BT3X8 (2 pcs.) from the OHP sensor and remove the (OHP)
sensor from the paper guide assembly (UR).
3) Remove the paper empty sensor (PE) from the paper guide assembly (UR)
Fig.7-73
4.6.6 Paper Feeding Sensor (PT1)
1) Remove the paper feeding sensor from the stay feeder.
2) Disconnect the connector on the paper feeding sensor.
Fig.7-74
Paper Empt
y
Sensor
OHP Sensor
Paper guide assembly (UR)
Paper Feeding Senso
r