Brother HL-2400C - Engine Controller Mode

VIII-6
Display Message Meaning Countermeasure
44 SIMM ERROR
Incorrect installation
of SIMMs
Install SIMMs correctly,
referring to the printed error
message.
45 MIO ERROR
Error in
communication with
the MIO card
Install the MIO card correctly.
47 CARD1(2)R ERROR
Card read error
Use a new card. If the same
error occurs, consult your
dealer or service personnel.
XX SIZE ERROR
Paper of incorrect size
is loaded into XX. XX
is T1/2.
Set the correct size of paper
in T1/2.
IGNORE DATA
Data is ignored
because of an error in
the PostScript
language program.
Press the Reset button. If the
same error occurs, you may
need to add optional SIMM
memory.
2.2 Engine Controller Mode
The Ready LED is lit, and applicable messages appear on the liquid crystal display (LCD)
in the following cases;
1) Consumables require to be replenished.
2) Waste toner pack is full of waste toner.
3) Paper jam.
4) Periodic maintenance.
5) Maintenance work being incomplete.
The above cases are not regarded as a breakdown, and should be treated in accordance
with Table 8-2;
Table 8-2
Display Message Meaning Countermeasure
11 NO MEDIA UPP/LOW
No paper in the upper
cassette / lower
cassette
Replenish paper.
11 CHK MEDIA
UPP/LOW
Inconsistency of
media
Change media.
12 NO TRAY UPP/LOW
No upper / lower
media cassette
Install cassette(s).
13 REPLACE TONER
Y/M/C/K
Toner (Y, M, C, K)
empty
Replace with new toner
cartridge(s).
14 CHECK WASTE
TONER
Waste toner pack full
of toner
Replace with a new waste
toner pack.
14 CHECK FUSER OIL
Change the oil bottle Replace with a new oil bottle.