Brother HL-2400C - Inner Jam; Outer Jam; Others

VIII-9
3.2 Inner Jam
Table 8-3-2
Problem Item Step Check Item Result Action
Open the transfer unit and
check.
1
Is there any paper inside the
unit?
YES
Remove the paper
inside.
2
Is the transfer roller firmly
locked by the lock lever?
NO
Fix the transfer roller
with the lock lever.
Transfer Unit 3
Is the paper discharger unit
installed in place?
NO
Install the paper
discharger unit firmly
in place.
4
Is there paper dust around the
registration roller?
YES
Clean the registration
roller with a cotton
cloth.
5
Is the wire of the paper
discharger unit damaged?
YES
Replace the existing
paper discharger unit
with a new one.
6
Is the fusing unit installed in
place?
NO
Install the fusing unit
firmly in place.
Fusing Unit 7
Is there any paper trapped
between the rollers?
YES
Remove the trapped
paper.
8
Is there fuser oil still in the oil
bottle?
NO
Replace the existing
oil bottle with a new
one.
3.3 Outer Jam
Table 8-3-3
Problem Item Step Check Item Result Action
Print Paper 1
Is the print paper a
recommended paper?
NO
Use a recommended
paper.
Paper Exit Unit
1
Is the paper exit unit firmly
locked by the lock lever?
NO
Open and close the
paper exit unit again.
2
Is there paper dust around the
exit roller?
YES
Clean the exit roller
with a cotton cloth.
3.4 Others
Table 8-3-4
Problem Item Cause Result Action
The edge of
print paper is
creased.
Is the curled paper edge creased when
the paper is loaded through the pick-up
roller?
YES
Turn over the paper in
the media cassette.