Brother HL-2400C - Unpack the Starter Kit

III-4
2.2 Unpack the Starter Kit
<Unpacking Procedure>
1) Open the vinyl bag and slide off the cardboard sleeve covering the starter kit.
2) Confirm all of the following parts are inside the starter kit packing box.
No. Kit Name Appearance Quantity
1
Toner Cartridge
(Y,M,C,K)
4
2 OPC Belt Cartridge 1
3 Oil Bottle 1
4 Fuser Cleaner 1
5 Syringe 1
PRECAUTION
When shipping the printer, remove the oil bottle and the fuser cleaner from the fusing
unit. After removing the oil bottle, be sure to remove the oil remaining in the fusing unit
with the supplied syringe. Failure to do so will cause severe damage to the printer.
Y
(
Yellow
)
M
(
Ma
g
enta
)
C (Cyan)
K
(
Black
)