Brother HL-2400C - Install the Oil Bottle and Fuser Cleaner

III-7
Note:
The installation order of the four toner
cartridges should be from the bottom to the
top, in terms of colors this is in the order
Cyan (C), Magenta (M), Yellow (Y), and
Black (K).
4) Close the front cover.
K
Y
M
C
Fig.3-11
3.3 Install the Oil Bottle and Fuser Cleaner
1) Pull out and remove the orange
protective parts fitted between the
rollers of the fusing unit.
Fig.3-12
2) Install the oil bottle into the fusing unit.
Fig.3-13
3) Install the fuser cleaner into the fusing
unit.
4) Secure the oil bottle and the fuser
cleaner with the retainer lock levers.
5) Close the top cover.
Fig.3-14
Orange protective
part
Retainer
lock lever
Oil Bottle
Fuser Cleaner