CHAPTER 4 OPTIONS
4–19
☛
☛☛
☛
7.
Connect the flat cable to the main controller board.
Fig. 4-21
☛
☛☛
☛
8.
Secure the metal plate with the three screws in the order shown.
Fig. 4-22
☛
☛☛
☛
9.
Install the side cover.
☛
☛☛
☛
10.
Reconnect the interface cable from your computer.
Plug the power cord into the AC outlet, and then turn on the printer.
☛
☛☛
☛
11.
Format the HDD from the control panel. See Chapter 3 for details.
①
①①
①
③
③③
③
②
②②
②
To Next Page
Loading...
