1-36
✒
✒✒
✒
Note
Make sure that the neatly stacked paper is correctly seated on the multi-
purpose tray, otherwise paper may not be fed correctly, resulting in a skewed
printout or a paper jam
☛
☛☛
☛
5.
While pressing the paper guide release lever, slide the adjuster to fit the
paper size.
Fig. 1-26
Warning
Do not touch transparencies that have just been printed because they are
very
hot!
✒
✒✒
✒
Note
When you place paper in the multi-purpose tray, note the following:
• When printing, the inside tray automatically rises to feed paper into the
printer.
• The print surface must be face up.
• The leading edge must be placed inside first so it rests lightly against
the printer.
• The top of the paper stack must be under the guides that are on both
sides of the tray.
To Next Page
Loading...
