Brother HL-2460 - Page 135

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-37
Unhook the hook to remove the plate cam gear 28 with the plate cam L at the left-hand side.
(10) Remove the two plate spring MP from the plate. Remove the three bind B M3x8 Taptite
screws to remove the plate from the MP tray frame.
(11) Pull the boss of the MP tray frame outwards to release the plate ASSY MP from the MP
tray frame.
(12) Remove the right side of the plate ASSY MP from the MP tray frame first while pulling the
MP tray frame outwards and remove the plate ASSY MP completely.
Fig. 4-64
NOTE:
When re-assembling gears, follow the direction below:
(1) Fit the cam gear 44 to the MP tray frame.
(2) Fit the plate cam L to the MP tray frame.
(3) Fit the plate cam gear 28 to the MP tray frame aligning notches of the plate cam gear 28 to
the gear 44 and the plate cam L.
Fig. 4-64a
Taptite, bind B M3x8
Taptite, bind B M3x8
Plate
Plate cam gear 28
Plate cam L
Plate ASSY MP
Boss
MP tray frame
Plate spring MP
Plate
spring MP
PR2001076
MP tray frame
Plate cam gear 28
Plate cam L
Gear 44