Brother HL-4000CN - Paper Transfer; Paper Transfer Route (Without Option)

III-22
4. PAPER TRANSFER
4.1 Paper Transfer Route (without option)
Paper transfer by "Regi Roll" and "Metal Roll" of CHUTE ASSY REGI
Paper feed from paper tray (Tray 1)
Print output
Paper transfer by "ROLL DUP"
and "ROLL PINCH DUP"
Paper transfer to duplex path by reversing
"ROLL EXIT" and "ROLL MID"
Paper feed by "ROLL ASSY" in cassette
and "ROLL ASSY" in feeder
Paper transfer by "ROLL ASSY TURN"
and "CHUTE ASSY TURN"
Paper feed from MSI
Paper transfer by "IDT2" of PRINT HEAD CARTRIDGE ASSY and
"TRANSFER ROLL CARTRIDGE" of TRANSFER ROLL CARTRIDGE UNIT ASSY
Paper transfer by "Heat Roll" and "Fuser Belt" of FUSER ASSY
Paper transfer by "ROLL MID" of CHUTE ASSY EXIT and "ROLL PINCH" OF CHUTE ASSY OUT
Paper transfer by "ROLL EXIT" of CHUTE ASSY EXIT and "ROLL PINCH EXIT" of CHUTE ASSY OUT
Paper transfer by "ROLL ASSY EXIT" and "Pinch Roll" of FRAME ASSY FUSER
Paper feed by "ROLL ASSY FEED (MSI)"
and "ROLL ASSY RETARD"
Paper transfer by "ROLL TURN"
and "ROLL PINCH TURN"
Paper feed by "ROLL ASSY FEED (Tray)"
Fig.3-32