II-4
1.3 Removing the Paper Tray Protective Materials
Each tray of this printer has two protective materials to suppress the influences of
vibrations and shocks during move.
Remove the protective materials as explained next.
Note:
The protective materials are necessary for the long-distance move of the printer. Be sure
not to lose them.
Fig.2-8
1) Pull out the paper tray until it stops.
Fig.2-9
2) Hold the paper tray by both hands and extract it by lifting this side up.
Note:
Put the removed paper tray at a flat place.
Fig.2-10
To Next Page
Loading...
