Brother HL-4000CN - Page 53

6-6
18. Check that the settings specified in the NetWare Print Environment Settings
dialog box are entered in the NetWare tab of the Configure dialog box as
follows:
Example:
Item Queue Server Mode Remote Printer Mode
Print Server Name BRN_4000F4 CLEVER-PS (selected
from already existing
print server)
Remote Printer Name --- BRN_4000F4-P
NDS Tree Name BTREE BTREE
Context Name 0U=SALES.
0=BROTHER
0U=SALES.
0=BROTHER
19. Click the Netware Control tab.
20. Enter the required item and click the OK button.
21. When you use Remote Printer mode, reboot the Netware print server on the
Netware file server.