Brother HL-4000CN - Page 55

6-8
Creating Printer Object
6. Click the Create button. The Input Name dialog box is displayed.
7. Enter the printer name at Name, and click the OK button. Example:
BRN_4000F4-P
The Printer Name will be entered in Printer name of the NetWare Print
Environment Settings dialog box.
Creating Print Queue Object
8. Click the Create button. The Input Name dialog box is displayed.
9. Enter the print queue name and click OK. Example: BRN_xxxxxx-Q
The queue name will be entered in Queue Name of the NetWare Print
Environment Settings dialog box.
10. When the print server, printer and queue are all set, click the OK button.
You can specify users that can be connected to the queue by clicking the
User button.
11. Check that the settings specified in the NetWare Print Environment Settings
dialog box are entered in the NetWare tab of the Configure dialog box as
follows:
Example:
Item Queue Server Mode Remote Printer Mode
Print Server Name BRN_4000F4 CLEVER-PS (selected
from already existing
print server)
Remote Printer Name --- BRN_4000F4-P
File Server CLEVER CLEVER
12. Click the Netware Control tab.
13. Enter the required item and click the OK button.
14. When you use Remote Printer mode, reboot the Netware print server on the
Netware file server.