Brother HL-4000CN - Changing the Configuration; Other Sources of Information

7-6
Changing the Configuration
From a Macintosh, the easiest way to change the printer or print server parameters is
to use a web browser.
Simply connect to the printer using the format: http://ip_address
where ip_address is the address of the printer.
PC users can also use the BRAdmin application to change printer and print server
details.
Other Sources of Information
1. Visit http://solutions.brother.com/
for more information on network printing.
2. Refer to the printer User's Guide "1.2 Configuring the Printer on a Network"
for information on how to configure IP address information using the printer
control panel.
3. Refer to chapter 8 of this guide for more information about Web Based
Management.