Brother HL-4040CN - Paper Guide DX; HV TR Top Cover

Confidential
3-43
8.14 Paper Guide DX/ HV TR Top Cover
(1) Release the two Bosses, and then remove the Paper guide DX from the Transfer HVPS
PCB unit while lifting it up slightly.
Note:
When removing the Paper guide DX, be careful not to damage the two Ribs.
Fig. 3-39
(2) Slide the HV TR top cover to the left hand side and release the four Hooks. Then, remove
the HV TR top cover.
Fig. 3-40
Boss
Hook
Transfer HVPS PCB unit
Boss
Hook
Paper guide DX
HV TR top cover
Hooks
Transfer HVPS PCB unit
Hooks
<Back side>
<Back side>
Ribs