Brother HL-4040CN - Paper and Computer Requirements

Confidential
3-64
8.23 Belt Cleaner Release Sensor PCB ASSY
(1) Release the two Hooks to remove the Belt cleaner release ASSY from the Middle plate.
Fig. 3-76
(2) Turn the Belt cleaner release ASSY upside down. Remove the bind B M3x8 Taptite screw,
and then remove the SOL PCB sheet and Belt cleaner release sensor PCB ASSY.
Fig. 3-77
Hook
Hook
Belt cleaner release ASSY
Belt cleaner release sensor PCB ASSY
SOL PCB sheet
Belt cleaner release case
Taptite, bind B M3X8
Middle plate
<Front side>
<Bottom of case>