Brother HL-4040CN - Laser Unit; Hook Slope

Confidential
3-93
8.46 Laser Unit/ Hook Slope
(1) Remove the four cup S M3x8 Taptite screws, and then remove the two Hook slopes.
Fig. 3-131
(2) Remove the ten cup S M3x6 Taptite screws (9 pieces from the top and 1 piece from the
front side), and then remove the Scanner cover.
Fig. 3-132
Assembling Note:
When assembling the Scanner cover, secure the screws in the order of the numbers which are
indicated on the Scanner cover.
Hook slope
Hook slope
Taptite, cup S M3x8
Frame unit
Taptite, cup S M3x8
Scanner cover
Taptite, cup S M3x6
Taptite, cup S M3x6
Taptite, cup S M3x6
Taptite, cup S M3x6
Frame unit
<Front side>
<Front side>