Brother HL-4040CN - Drum Drive ASSY; Drum Phase Sensor PCB ASSY 1, 2

Confidential
3-99
8.48 Drum Drive ASSY/ Drum Phase Sensor PCB ASSY 1, 2
(1) Remove the Engine insulation sheet from the Harness shield plate, which is fixed with a
two-sided adhesive tape.
Fig. 3-142
(2) Remove the three cup S M3x6 Taptite screws, and then remove the Harness shield plate
from the Frame unit.
Fig. 3-143
Harness shield plate
Engine insulation sheet
Frame unit
Taptite, cup S M3x6
(Tightening torque:
0.80 ±0.1 N m)
Harness shield plate
<Left side>
<Left side>
Taptite, cup S M3x6
(Tightening torque:
0.80 ±0.1 N m)
Taptite, cup S M3x6
(Tightening torque:
0.50 ±0.1 N m)