Confidential
3-104
8.50 Paper Feed/Belt Cleaner Motor ASSY
(1) Remove the four cup S M3x6 Taptite screws (2 pieces provided on each of the front and
back sides), and then remove the Paper feed/belt cleaner motor ASSY from the Drive
frame unit ASSY.
Fig. 3-151
Assembling Note:
Be sure to hook the harness of the Paper feed/belt cleaner motor ASSY onto the Rib of the
Frame L as shown in the figure below.
Fig. 3-152
Paper feed/belt cleaner motor ASSY
Taptite, cup S M3x6
Drive frame unit ASSY
Taptite, cup S M3x6
Rib
Paper feed/belt cleaner motor ASSY
Drive frame unit ASSY
Frame L
To Next Page
Loading...
