Brother HL-4040CN - Develop Release Sensor PCB ASSY; Develop Press Drive L ASSY

Confidential
3-105
8.51 Develop Release Sensor PCB ASSY
(1) Remove the cup B M3x8 Taptite screw.
(2) Remove the Develop release sensor PCB ASSY from the Frame unit. Disconnect the
Connector from the Develop release sensor PCB ASSY.
Fig. 3-153
8.52 Develop Press Drive L ASSY
(1) Remove the Pull up lever spring (for L) from the Hook of Develop press drive L ASSY.
Fig. 3-154
Develop release sensor PCB ASSY
Taptite, cup B M3x8
Hook
Frame unit
Frame unit
Develop press drive L ASSY
Hook
Pull up lever L
Pull up lever spring (for L)
<Left side>
<Left side>
Connector