Confidential
App.1-1
APPENDIX 1 WORKER SWITCH (WSW)
The worker switch (as described “WSW”) is for modifying preferences that match the machine
to the environmental conditions. Use this function if the machine malfunctions due to
mismatching.
It is not allowed to access all of those selectors, but it is allowed to access the selectors
shaded in the worker switch table.
Worker Switch
WSW No. Function Refer to:
WSW54 PictBridge command delay time App. 1-2
WSW55 Interval of time required for the developing bias voltage
correction
App. 1-2
PS emulation function setting (HL-4040CN only) App 1-3
WSW56
“Last Job Reprint” function setting App 1-3
To Next Page
Loading...
