Confidential
App.2-1
APPENDIX 2 DELETION OF PERSONAL INFORMATION
Personal information such as wired and wireless network settings in the machine is recorded in
the EEPROM on the Main PCB. Use Function code 01 in maintenance mode to delete this
information with a single operation.
(Refer to “1.4.1 EEPROM Parameter Initialization” in Chapter 5.)
<Operating Procedure>
(1) With the machine in the Ready state press the OK button, then within 2 seconds of
pressing the OK button press the Go button, and within 2 seconds of pressing the Go
button, press the
button four times to make the machine enter the maintenance mode.
(2) The machine displays “
” on the LCD. Press the or button
to select “MAINTENANCE 01”.
(3) Press the OK button. The “PARAMETER INIT” appears on the LCD. Upon completion of
parameter initialization including the wired and wireless network settings, the machine
returns to the initial stage of the maintenance mode.
(4) Press the
or button to select “MAINTENANCE 99”. Press the OK button to exit from
the maintenance mode.
To Next Page
Loading...
