Brother HL-4040CN - Procedures to Replace Periodical Replacement Parts

Confidential
2-3
2.2 Procedures to Replace Periodical Replacement Parts
2.2.1 Fuser Unit & Toner Filter Frame ASSY
<Uninstalling Procedure>
(1) Open the Back cover.
Fig. 2-1
(2) Remove the two pan (washer) B M4x14 Taptite screws, and then pull out the Fuser unit to
the back of the machine.
Fig. 2-2
Back cover
<Back side>
Fuser unit
Taptite, pan (washer) B M4x14
Taptite, pan (washer) B M4x14
<Back side>