Confidential
Ref.1-17
2.8 Print Speeds with Various Settings
Print speed is up to 20ppm for A4 size and 21ppm for Letter size when loading A4 or Letter
size paper from the paper tray in the plain paper mode.
Actual print speed varies depending on the media type or paper size as shown in the tables
below;
<A4/Letter size>
Media type setting All models
Plain Paper, Recycled Paper 20/21ppm
Plain Paper Thick 20/21ppm
Thick Paper, Envelopes, Envelopes Thin, Label 10ppm
Thicker Paper, Bond Paper, Envelopes Thick 4ppm
<Smaller size than A4 or Letter>
Media type setting All models
Plain Paper 20/21ppm
Plain Paper Thick, Recycled Paper 60 sec 20/21ppm Æ 8ppm
Thick Paper, Envelopes, Envelopes Thin, Label 30 sec 10ppm Æ 8ppm
Thicker Paper, Bond Paper, Envelopes Thick 4ppm
Post Card 30 sec 10ppm Æ 8ppm
Note:
- The print speed may vary according to conditions, such as paper size and paper tray.
- When a smaller size paper than A4 or Letter is printed, the temperature on both edges of the
fuser unit is much higher than the temperature on the center of the unit where the paper is fed
depending on the setting or model. Therefore, the print speed is slowed in order to decrease
the temperature on the edges after the specified time, it is maximum print speed when you
first start printing.
- The actual print speed varies depending on the paper size.
To Next Page
Loading...
