Security features
126
12
Creating CSR and installing a certificate 12
How to create the CSR 12
a Click Create CSR on the Configure Certificate page.
b Enter a Common Name and your information, such as Organization. Then click Submit.
Note
• The length of the Common Name is less than 64 bytes. Enter an identifier such as an IP address, host
name or domain name to use when accessing this printer through SSL/TLS communication. The host
name is displayed by default. The Common Name is required.
• The length of the Organization, the Organization Unit, the City/Locality and the State/Province is less
than 64 bytes.
• The Country/Region should be an ISO 3166 country code composed of two characters.
c When the contents of the CSR appear, click Save to save the CSR file to your computer.
d Now the CSR is created.
Note
Follow your CA policy regarding the method to send a CSR to your CA.
How to install the certificate to your printer 12
When you receive the certificate from a CA, follow the steps below to install it into the print server.
Note
Only a certificate issued with this printer’s CSR can be installed.
a Click Install Certificate on the Configure Certificate page.
b Specify the file of the certificate that has been issued by a CA, and then click Submit.
c Now the certificate is created successfully. Check the box on the left of each function you want to disable,
and then click OK.
To Next Page
Loading...
