Configuring your printer for a network with an Ethernet cable connection
12
2
Setting the IP address and subnet mask 2
Using the BRAdmin Light utility to configure your network printer 2
BRAdmin Light 2
The BRAdmin Light utility is designed for initial setup of Brother network connected devices. It also can
search for Brother products in a TCP/IP environment, view the status and configure basic network settings,
such as IP address. The BRAdmin Light utility is available for Windows
®
2000/XP, Windows Vista™,
Windows Server
®
2003 and Mac OS
®
X 10.2.4 or greater.
Note
• Please use the BRAdmin Light utility version that was supplied on the CD-ROM with your Brother product.
You can also download the latest Brother BRAdmin Light utility version from http://solutions.brother.com
• If you require more advanced printer management, use the latest Brother BRAdmin Professional utility that
is available as a download from http://solutions.brother.com
This utility is only available for Windows
®
users.
• If you are using Personal Firewall software (e.g. the Internet Connection Firewall available in
Windows
®
XP, Windows Vista™ and Windows Server
®
2003), disable it. Once you are sure that you can
print, re-start your Personal Firewall software.
• Node name: Node name appears in current BRAdmin Light. The default Node name of the network card
in the printer is “BRNxxxxxx” for a wired network or “BRWxxxxxx” for a wireless network (“xxxxxx” is the
last six digits of Ethernet address.).
• The default password for Brother print servers is access.
a Start the BRAdmin Light utility.
For Windows
®
2000/XP, Windows Vista™ and Windows Server
®
2003 users
Click Start / All Programs
1
/ Brother / BRAdmin Light / BRAdmin Light.
1
Programs for Windows
®
2000 users
For Mac OS
®
X 10.2.4 or greater users
Double-click Macintosh HD (Startup Disk) / Library / Printers / Brother / Utilities /
BRAdmin Light.jar file.
b BRAdmin Light will search for new devices automatically.
To Next Page
Loading...
