Brother HL-4040CN - Using the Brother Automatic Installer Application in the CD-ROM to Configure Your Wireless Network Printer; Using the Setup Wizard from the Control Panel

Configuring your printer for a wireless network (For HL-4070CDW)
25
3
Using the Brother automatic installer application in the CD-ROM to configure
your wireless network printer 3
We recommend that you use the Brother automatic installer application in the CD-ROM we have provided
with the printer. For installation, see Wireless configuration for Windows® using the Brother automatic
installer application on page 32 or Wireless configuration for Macintosh® using the Brother automatic
installer application on page 59.
Using the Setup Wizard from the control panel 3
You can configure your print server by using the Setup Wizard function. This is located in the LAN menu on
the printer’s control panel. See to the steps below for further information.
a Press any of the Menu buttons (+, -, OK or Back) of the control panel on your printer to take the printer
offline.
Ready
h
Select ab or OK
Machine Info.
b Press the + or - button to select LAN.
Select ab or OK
LAN
c Press OK to move to the next menu level.
LAN
Wired
d Press the + or - button to select WLAN.
LAN
WLAN
e Press OK to move to select the next level.
WLAN
TCP/IP
f Press the + or - button to select Setup WLAN.
WLAN
Setup WLAN
g Press OK to move to selsect the next level.
Setup WLAN
Setup Wizard
h Press the + or - button to select Setup Wizard, then press OK.
Setup WLAN
Setup Wizard