Configuring your printer for a wireless network (For HL-4070CDW)
28
3
w The following will be displayed.
To apply the wireless settings, select Yes and press OK. Go to x.
To cancel, select No and press OK. Go to k.
Apply Settings?
Yes
x The printer starts to connect the wireless device you have selected.
Connecting WLAN
y If you connect to the wireless network is connected successfully, the display shows Connected for 2
seconds and configuration is completed.
Connected
Note
If the connection fails, the display will shows Connection NG for 2 seconds. See Wireless network
troubleshooting on page 137.
To Next Page
Loading...
