Wireless configuration for Windows
®
using the Brother automatic installer application
53
4
m The wizard will search for wireless networks available from your printer. Choose the Ad-hoc network you
wish to associate the printer with, and then click Next.
If no Ad-hoc wireless networks are available, you need to create a new wireless network. Go to p.
Note
• If the list is blank, check if the printer is within range for wireless communication. Then, click Refresh.
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Follow the on-screen instructions for entering the Name (SSID) and the Channel number.
n If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to q.
To Next Page
Loading...
