Brother HL-4040CN - 5 Wireless Configuration for Macintosh Using the Brother Automatic Installer Application; Configuration with an Access Point that Supports Secureeasysetup

59
5
5
Configuration with an access point that supports
SecureEasySetup™
5
Note
If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
a Make sure that the front cover is closed and the power cord is plugged in.
b Turn on your printer and wait until the printer is in the Ready state.
c Turn on your Macintosh
®
.
d Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL4040_4050_4070 icon on your
desktop. Double-click the Start Here icon. Select your printer and the language.
e Click Install Printer Driver.
Wireless configuration for Macintosh
®
using the Brother automatic installer
application
5