Wireless configuration for Macintosh
®
using the Brother automatic installer application
64
5
g Press OK to move to select the next level.
WLAN
TCP/IP
h Press the + or - button to select WLAN Enable.
WLAN
WLAN Enable
i Press OK to move to select the next level.
WLAN Enable
Off
j Press the + or - button to select On.
WLAN Enable
On
k Press OK.
Accepted appears on the second line of the LCD.
WLAN Enable
Accepted
Configure the wireless settings 5
a Turn on your Macintosh
®
.
b Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL4040_4050_4070 icon on your
desktop. Double-click the Start Here icon. Select your printer and the language.
To Next Page
Loading...
